Preliminary Technical Data
ADM106X EVAL BOARD HARDWARE
EVAL-ADM106x
The ADM106x Evaluation Board is designed to provide all of
the necessary stimuli to the ADM106x, showing the many
features of the device in a compact, self contained environment.
The following pages contain a simple block diagram of the
functions on the board, followed by a detailed schematic of the
board and finally, the tracking, power and silkscreen layers for
board.
The two main features of the board are the programmable
Channel
1
2
3
4
5
6
On
5V
5V
5V
5V
5V
5V
Off
T6
T7
T8
T9
T10
T11
Controlling
PDO
PDO1
PDO2
PDO3
PDO4
PDO5
PDO6
voltage circuits and the output indicator LED’s. There are eight
programmable voltage circuits provided. The circuits are
labeled VX1, VX2, VX3, VX4, VP1, VP2, VP3, VP4. These
are programmable, via the Eval Board software, over a voltage
range of 0.6V to 6V. Programming of these supplies is detailed
in the software section of this Eval Note. The eight circuits
provide voltages to eight of the ten inputs to the ADM106x.
The inputs which do not have a programmable supply are VX5
(where a test point is available for the user for their own
external input) and VH, which has 12V driving it directly (or
alternatively, uses the programmable supply of VP4, if
required).
Table 5. Settings for Manual Switch, S1
The second switch, SW2, is for setting the SMBus address of
the ADM106x. The format of the SMBus address for each of
the devices is XXXXX A1 A0. A1 and A0 are pins on the
device, allowing up to four ADM106x’s to be connected to the
same SMBus. The manual switch on the Eval board allows any
one of these four addresses to be set. The table below shows
the effect of settings these switches
The ten output indicator LED’s are labeled PDO1 to PDO10.
These indicate a logic high on the output pins of the ADM106x.
The LED’s for PDO1- 6 are dual colour LED’s. This is to
indicate when a PDO is being used as a logic output or as a
FET driver output. Green indicates a logic output while red
indicates a FET driver output.
Channel1
Off
Off
On
On
Channel2
Off
On
Off
On
ADM106x
Address
XXXXX 11
XXXXX 10
XXXXX 01
XXXXX 00
EVAL BOARD MANUAL SWITCHES
The ADM106x Eval Board uses only two manual switches. All
other switching functions are electronic and controlled using
the ADM106x software tool. Control of all of the board
functions is discussed in the software section.
The two manual switches are S1 and SW2. Details on these is
provided below.
S1 allows the user to connect a supply to the drain of one of the
six FET’s provided on the board. This allows the user to verify
the function of controlling a supply by having an N- Channel
FET placed in the supply path and controlling its turn on with
one of the FET drivers of the ADM106x. The default
connection of the switch is closed, thus connecting it to a 5V
supply on the board. When off, a supply can be connected by
the user to one of the test points provided. It is not
recommended that a supply greater than 5V be connected to
these test points (since with a gate voltage of 12V max., it may
be difficult to fully enhance the gate of a FET with V D > 5V.
Table 3 opposite indicates the function of this switch.
Rev. PrB | Page 5 of 38
Table 6. Settings for Manual Switch, SW2
相关PDF资料
EVAL-ADM1075CEBZ BOARD EVAL FOR ADM1075
EVAL-ADM1087EBZ BOARD EVALUATION FOR ADM1087
EVAL-ADM1166TQEBZ BOARD EVAL FOR ADM1166TQ
EVAL-ADM1168LQEBZ BOARD EVAL FOR ADM1168LQ
EVAL-ADM1170EBZ BOARD EVALUATION FOR ADM1170
EVAL-ADM1171EBZ BOARD EVALUATION FOR ADM1171
EVAL-ADM1172EBZ BOARD EVALUATION FOR ADM1172
EVAL-ADM1175EBZ BOARD EVALUATION FOR ADM1175
相关代理商/技术参数
EVAL-ADM1063LFEB 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-ADM1063LFEBZ 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-ADM1063TQEB 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-ADM1063TQEBZ 功能描述:BOARD EVALUATION FOR ADM1063TQ RoHS:是 类别:编程器,开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信,线路接口单元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板,电源,线缆,CD 其它名称:82EBV2081
EVAL-ADM1064LFEB 制造商:Analog Devices 功能描述:EVALUATION BOARD I.C. - Bulk
EVAL-ADM1064LFEBZ 制造商:Analog Devices 功能描述:EVAL KIT FOR ADM1064 - Bulk
EVAL-ADM1064TQEB 功能描述:BOARD EVALUATION FOR ADM1064TQ RoHS:否 类别:编程器,开发系统 >> 评估演示板和套件 系列:- 标准包装:1 系列:- 主要目的:电信,线路接口单元(LIU) 嵌入式:- 已用 IC / 零件:IDT82V2081 主要属性:T1/J1/E1 LIU 次要属性:- 已供物品:板,电源,线缆,CD 其它名称:82EBV2081
EVAL-ADM1064TQEBZ 制造商:Analog Devices 功能描述:EVAL BOARD - Bulk